No se necesitan cables
Todos los sensores son inalámbricos
No se requiere registro de usuario
Sin problemas de política de privacidad
Datos almacenados solo en la puerta de enlace
Sin cuotas mensuales ni suscripciones
Capacidad de expansión ilimitada
Conexión directa, encriptada y en tiempo real 1-to-1 entre un dispositivo móvil y la puerta de enlace
Tecnología de comunicación inalámbrica de alto nivel
Bajo consumo de energía: baterías de larga duración hasta 5 años
Configuración fáci
The Tunneling service(1) platform is built upon P2P(2) technology which makes direct secure communication between end user client devices(3) and their IoT(4) devices possible.
P2P technology has been used in a wide range of currently used Internet standard products like Skype, Teamviewer and other communication platforms where latency is important (large delays in voice or video/screen share is problematic).
The Tunneling service P2P IoT platform that ZigBoat contains, ensures that a direct connection is created and that the data between the end user devices and IoT devices is travelling as fast as possible through the Internet, thus with the lowest latency.
This enables you to build the most responsive data visualization (from IoT device to end user) and remote control (from end user to IoT device) interfaces for your product.
Maximum privacy: Your connection between the gateway on boat and your mobile device is direct and encrypted. No any data stored in cloud.
With the Tunneling service platform, clients interact directly with devices.
The Tunneling services running in the cloud act only as a sort of telephone central – mediating direct, end-to-end encrypted connections.
Once established, these services are out of the loop – as opposed to “traditional” cloud data scenarios where central services are involved in all interaction between clients and devices.
Industry standard cryptography is used for authentication, confidentiality and integrity.
EASY UNDERSTANDING FOR BOATERS
(1) The Tunneling service: The private connection service between your mobile device and the gateway on your boat.
(2) P2P: Pear to pear. The private secure connection only between your mobile device and the gateway on your boat
(3) End user client devices: mobile phones, tablets, etc…
(4) loT device: The gateway on your boat
ZigBee® is the wireless technology used for sensor networks. It is a low-power, low data rate (250kb/s), short-range. This mesh wireless network provides extended battery life and is one of the best solutions for wireless controlling and monitoring applications.
The ZigBoat™ Starter Kit includes:
The ZigBoat™ Connectivity Kit includes:
The ZigBoat™ Pro Kit includes (for US Only):
Yes, just decide where to put the Gateway on your boat.
Use the right length of cable needed to connect the Gateway to a power source.
ZigBee®Sensors can be mounted with 3M adhesive tape (supplied) or with screws (not supplied)
The Gateway included in Pro Kit (available in U.S only) has a battery backup embedded and can work for few hours without power supply.
No, you don’t. If you would like to continue protecting and monitoring your boat while stored, you can leave the system on if you periodically check and charge your batteries.
The average consumption of the Gateway is:
Without 3G USB dongle (if using Wi-Fi for internet connection) 250 mA on 12V systems
With 3G USB dongle plugged in the Gateway (if using 3G for internet connection) 800 mA on 12V systems.
Yes, the ZigBoat™ works worldwide where as long as you have Internet access or 3G coverage.
No, the Zigboat™ system does not require any registration or monthly/yearly data subscription fees.
Including the sensors in the Zigboat™ Starter Kit, the following sensors are also available to extend your system:
ZigBoat™ alerts you by push notification or SMS message when something goes wrong on your boat.
The push notification / SMS alerts repeat in 5 minute time intervals.
When you receive a notification, you should check the situation on board and be sure that you fix the problem.
Remember that the sensor status in the App. interface will not change until the problem is solved on board.
Yes, both push notification and SMS support multiple users.
Push notifications:
Potentially, an unlimited number of mobile devices can receive push notifications from the same Gateway.
The ZigBoat™ app must be installed and the Gateway’s QR code must be scanned on each mobile device that wishes to receive notifications.
SMS notifications:
You can add up to 5 different Mobile Phone numbers to receive SMS notifications using the optional 3G Dongle.
Yes, you can ask for that if it is accepted as extra protection in your insurance policy.
In the ZigBoat App. you can monitor unlimited ZigBoat system simply adding each Gateway through scanning Q.R. Code
You will receive a push notification on your mobile device when an update is available.
The ZigBoat™ app uses the same language as your mobile device. To change the app language you have to change your mobile device operating system language.
The Gateway should be placed in a central area on the boat to have better coverage conditions.
It is not recommended to install the Gateway in the engine room or in wet or damp places.
Yes, all push notifications are logged on your Gateway. You can read the last 100 notifications from the “Info” tab in your ZigBoat™ app. Your mobile device must be connected to the Gateway to read this list.
Minimum iOS 11 or higher is required
Minimum Android 5.0 (Lollipop) or higher is required
Unlimited.
The ZigBee®sensors operate worldwide on the 2.4 GHz band.
No, you do not receive a notification when the battery of the sensor is low. Please read the LOW BATTERY MODE section in the sensor’s manual.
The average battery life of a sensor is between 3 and 5 years under normal use.
Remember that the battery life can vary according to ambient conditions (high temperature, humidity, etc.).
The consumption of the Gateway is:
Without the 3G USB dongle (if using Wi-Fi for internet connection) 250 mA on 12V systems.
With the 3G USB dongle plugged in the Gateway (if using 3G for internet connection) 800 mA on 12V systems.
Yes,
for any customer support issues
US/Americas you can call +39 0544 1935902 during normal business hours between 08:30-12:30 and 13:30-17:30 (GMT +1)
Europe/ROW you can call +39 0544 1935902 during normal business hours between 08:30-12:30 and 13:30-17:30 (GMT +1)
Ensure that the sensor base is mounted far away from wet area and in a quiet area. Moreover, the sensor probe must be located over the highest position of the bilge pump float switch.
Yes, it’s possible to install the sensors on GRP, metal, wood surfaces using the supplied 3M adhesive tape. For more permanent mounting, you can use screws.
Yes, you can but please remember that you lose the warranty when the cable is cut, or the probe is open.
The engine oil is an insulator so it will not trigger the sensor.
Yes, they can be installed on steal doors. It does not cause any magnetic problems.
Yes, you can use door sensor for any storage locker. It is however suggested to install the sensor inside of the locker for better water resistance.
The Battery Sensor is set by default to 12V mode. To switch to 24V mode, please move the switch as indicated in the info sticker placed on the sensor.
No, the sensor is not damaged if you select the wrong voltage mode but it will not work until the right voltage selection is made.
Yes, you can download the app for iOS and Android devices for free.
Glomex, fundada en 1984, es una de las empresas líderes en la producción de antenas específicas para la industria marina. Nace con la ambición de ofrecer productos de calidad y conecte los navegantes en las telecomunicaciones marítimas, ha alcanzado su objetivo siempre centrándose en la calidad, la eficiencia, las inversiones en tecnología y recursos humanos, servicio y responsabilidad. Todos estos factores, que han contribuido en los últimos años para construir relaciones sólidas con los distribuidores y fabricantes de todo el mundo la artesanía. Estilo, rendimiento, la pasión, el profesionalismo y la excelencia trabajo duro son las características adicionales que refrenden Glomex en todo el mundo.
Glomex es la única empresa de fabricación en la industria marina que ofrece garantía por vida en muchos de sus productos, gracias a la cuidadosa selección de las materias primas, la investigación, los estudios de diseño y ensayos efectuados sobre una base diaria para cumplir con las normas internacionales y para desarrollar productos para diferentes aplicaciones, en militares o civiles. A todo esto se añade el envase del producto, que utiliza envases fabricados específicamente para evitar riesgos durante la expedición. Glomex y su gestión consideran la calidad como la suma de las características de cada producto individual con servicios tales envíos realizados con vehículos fiables y puntuales o igual de eficaces y oportunas post-venta. Centrándose en las necesidades reales de los navegantes Glomex ha alcanzado estándar de calidad de los productos y servicios, tales como siempre y en todo caso asegurar el contacto con la tierra o recibir señales de TV.
Con Glomex, the best in marine antennas, usted nunca estará solo en el mar.
